Storm Guard Roofing provides commercial roofing in Winston-Salem, NC, including flat and low-slope membranes, metal roofing, coatings, repairs, and replacements. We assess your roof, explain the options, document storm damage, and schedule work around your building’s operating hours.
We are a local contractor backed by a national restoration network, serving Winston-Salem and Forsyth County. Our goal is to provide building owners and facility managers with expert advice and reliable roofing systems to keep their customers, staff, products, and overall commercial space safe.
Schedule a consultation to have us assess your roof.
System choice depends on building use, roof slope, foot traffic, rooftop equipment, and exposure. As commercial roofing installers, we install and service:
| System | Best suited to | Key characteristic | Consideration |
|---|---|---|---|
| TPO | Low-slope retail and warehouse roofs | Heat-welded seams, reflective surface | Welding conditions affect seam quality |
| EPDM | Large, uninterrupted low-slope areas | Flexible rubber membrane | Dark surface absorbs heat |
| PVC | Grease, chemical, or kitchen-exhaust exposure | Chemical resistance, heat-welded seams | Substrate compatibility must be confirmed |
| Standing seam metal | Sloped commercial and institutional roofs | Concealed fasteners, continuous panels | Adequate slope and penetration detailing matter |
| Roof coatings | Sound, substantially dry systems | Renews surfaces without tear-off | Not for saturated decks or widespread failure |
System | Best suited to | Key characteristic | Consideration |
TPO | Low-slope retail and warehouse roofs | Heat-welded seams, reflective surface | Welding conditions affect seam quality |
EPDM | Large, uninterrupted low-slope areas | Flexible rubber membrane | Dark surface absorbs heat |
PVC | Grease, chemical, or kitchen-exhaust exposure | Chemical resistance, heat-welded seams | Substrate compatibility must be confirmed |
Standing seam metal | Sloped commercial and institutional roofs | Concealed fasteners, continuous panels | Adequate slope and penetration detailing matter |
Roof coatings | Sound, substantially dry systems | Renews surfaces without tear-off | Not for saturated decks or widespread failure |
The deck sets the terms for any roofing system. Sound sheathing stays; damaged decking is replaced to provide a solid nailable surface. Installation follows the manufacturer's procedures and the North Carolina Building Code requirements for wind uplift ratings and permit inspections.
We also focus on parapet walls, terminations, and flashing around penetrations, where low-slope systems are prone to failure. These details protect drainage, maintain system integrity, and help the roof perform through demanding commercial service conditions.
Most commercial roof decisions come down to three paths. The right choice for your commercial space depends on how much is compromised, whether moisture has reached the deck, and how much service life remains.
Three diagnostics help establish the answer before selecting the appropriate roofing path. A commercial roof inspection in Winston-Salem identifies open seams, split flashing, blocked drains, and persistent ponding water. A moisture survey, often using infrared imaging, identifies wet insulation beneath an intact-looking membrane. A core sample confirms assembly layers and deck condition.
| Path | When it fits | What it does not fix | Typical scope |
|---|---|---|---|
| Targeted repair | Isolated seam, flashing, penetration, or edge failures | Widespread saturation or end-of-life systems | Sectional work with minimal disruption |
| Restoration coating | Intact, dry membrane with weathering or detail issues | Wet insulation, deck damage, widespread membrane failure | Prepared and coated surface; the building typically stays open |
| Full replacement | Significant moisture, repeated failures, or an end-of-life system | Drainage flaws, which require correction | Tear-off, deck repair, insulation, and new membrane |
| Path | When it fits | What it does not fix | Typical scope |
| Targeted repair | Isolated seam, flashing, penetration, or edge failures | Widespread saturation or end-of-life systems | Sectional work with minimal disruption |
| Restoration coating | Intact, dry membrane with weathering or detail issues | Wet insulation, deck damage, widespread membrane failure | Prepared and coated surface; the building typically stays open |
| Full replacement | Significant moisture, repeated failures, or an end-of-life system | Drainage flaws, which require correction | Tear-off, deck repair, insulation, and new membrane |
A restoration coating can extend service life when the system qualifies. It will not dry saturated insulation or correct widespread membrane failure. If moisture affects a significant portion of the roof, coating it can postpone the underlying repair rather than solve the problem. For commercial roof repair in Winston-Salem, a professional assessment can identify whether isolated damage can be addressed without broader roof work.
Storm damage on a low-slope roof is easy to miss. Commercial roof repair contractors can assess conditions such as hail bruising, wind-driven seam separation, displaced ballast, bent or torn edge metal and flashing, and punctures from debris. A roof can sustain damage while still shedding water, making prompt documentation important even when no interior staining is visible.
Storm Guard documents damage with geotagged photographs tied to roof locations, close coverage of affected assemblies, and reports consistent with carrier and third-party adjuster requirements. This documentation helps us assist you and your carrier during the claim process by providing a clear record of observed conditions, affected areas, and recommended work. We record each failure's location, extent, and likely cause, helping distinguish isolated damage from broader deterioration.
We document the roof's condition and complete the work. Your policy, coverage, and settlement remain between you and your insurer. For commercial roof replacement in Winston-Salem, the right roofing components are installed in accordance with the current code requirements. Discuss this with your carrier early, particularly when code-required upgrades or replacement components may affect the scope before work begins.
A leak needs immediate attention. We can install emergency roof tarping to stop water intrusion and limit interior damage while assessment and documentation continue.
Schedule a consultation, and we will get someone on the roof.
For facility managers, the challenge is not just the roof. It is keeping tenants, customers, and operations moving during the project.
We at Storm Guard understand this, so we build the schedule around your building, not around our crew. Roof sections are staged so that only the active work area is open, while the remaining assembly remains watertight. Materials and debris are positioned away from customer entrances and delivery routes.
When noise could disrupt operations, louder phases can be scheduled outside operating hours. Each workday ends with site cleanup, including magnetic sweeps of the parking and loading areas.
Communication starts before work begins. You receive the project sequence and notice to share with tenants and staff. Crews maintain fall protection and site safety practices throughout the project, helping protect people, property, and operations.
The result is a commercial roofing worksite in Winston-Salem, NC designed to minimize disruption, protect access, and maintain steady progress.
Every Storm Guard project moves through four stages. As your commercial roofing contractor in Winston-Salem, we provide clear deliverables before the next step begins, from planning through closeout, with documentation for you.
| Stage | What we do | What you receive |
|---|---|---|
| Assess | Inspect the roof, deck, drainage, and details; add a moisture survey when warranted | Photo documentation and written condition summary |
| Advise | Explain repair, restoration, and replacement options for your roof | Written proposal with scope, system, and work sequence |
| Restore | Perform work to manufacturer specifications and the North Carolina Building Code | Confirmed schedule, daily cleanup, and site contact |
| Confirm | Walk the completed roof with you against Storm Guard standards and your expectations | Walkthrough sign-off, warranty documentation, and closeout paperwork |
Stage | What we do | What you receive |
Assess | Inspect the roof, deck, drainage, and details; add a moisture survey when warranted | Photo documentation and written condition summary |
Advise | Explain repair, restoration, and replacement options for your roof | Written proposal with scope, system, and work sequence |
Restore | Perform work to manufacturer specifications and the North Carolina Building Code | Confirmed schedule, daily cleanup, and site contact |
Confirm | Walk the completed roof with you against Storm Guard standards and your expectations | Walkthrough sign-off, warranty documentation, and closeout paperwork |
Before work begins, we confirm applicable warranty terms in writing. Your documents identify the workmanship or manufacturer's warranty, what it covers, and its duration. This gives you a clear record of the protections attached to completed work and the installed system.
This process keeps decisions documented, expectations clear, and each stage accountable.
Winston-Salem’s commercial properties vary widely, and their roofs reflect those demands. Downtown and the Innovation Quarter include research, lab, and converted historic buildings. Hanes Mall Boulevard and Stratford Road include multi-tenant retail properties where work must be limited to minimize disruption. Along Highway 52, large industrial roofs make drainage a key consideration.
We serve retail, office, light industrial, warehouses, churches, institutional buildings, and multi-tenant properties throughout Forsyth County, including Kernersville, Clemmons, Lewisville, Walkertown, King, and Bermuda Run.
Commercial roofing contractors should understand each property’s use, roof configuration, access requirements, operational needs, and the conditions affecting it. Storm Guard in Winston-Salem offers a wider range of commercial roofing services than usual.
Tell us about the building. A Storm Guard consultant will assess the roof, document its condition, and walk you through the options that genuinely fit it.
Assessments are provided at no charge.
Commercial roofing covers business and institutional buildings. These roofs are usually flat or low-slope and are made of TPO, EPDM, PVC, or metal. They differ from residential roofs in drainage, equipment loads, and repair sequencing.
It depends on how much is compromised and whether moisture has reached the deck. Isolated seam or flashing failures usually call for repair. Widespread saturation or a system nearing the end of its service life indicates the need for replacement. A moisture survey can provide the answer.
Cost depends on the roofing system, installation method, and site conditions. Each project is different, so a professional assessment can determine the right approach and investment.
Coverage depends on your policy and carrier. Storm Guard documents the roof conditions with geotagged photographs and completes approved work in accordance with code.
Service life varies by system, drainage, and maintenance. Our commercial roof maintenance in Winston-Salem can help identify conditions that may shorten a roof’s service life. An inspection can determine the condition of your existing roof and whether repair or other work is appropriate.
In most cases, no. We section the roof, stage materials away from customer access, and can schedule noisy work outside operating hours. We confirm the sequence before work begins.
Unless otherwise noted, each use of "Storm Guard," “us,” “we,” or “our” throughout Stormguardrc.com collectively refers to both the Storm Guard brand and the Storm Guard Franchise System, which is made up almost exclusively of independently owned and operated franchise locations.
