Window Replacement in Charlotte, NC

Single hung windows are among the most common of window types. In a single hung window, the lower sash can be opened either by pivoting inward or sliding upward. The upper sash is a fixed window, meaning it can’t be opened. These windows are one of the most inexpensive windows available, but they don’t allow for great ventilation. They are relatively low maintenance, but it may be difficult to clean the outside of the window.

Sliding windows are another type of single hung window that slide sideways instead of up or pivoting. A single hung window typically costs between $190 and $500 per window.

A double hung is another common type of window. In a double hung window, both the upper and lower sash may open either by sliding or pivoting. This makes it easy to clean and they offer great ventilation. However, the rail that separates the sashes may block your view. A double hung window will usually cost between $450 and $750.

Bay windows have three sections that curve outward, creating a “c” shape. The center window is usually a fixed picture window and the side windows are another type of window, often a single hung. Bay windows create extra space and allow more light into your home. However, they are more expensive than other types of windows and can be difficult to find treatments for. For the whole window, it can cost between $1,150 and $3,550 on average.

Bow windows are similar to bay windows but they are usually made up of four matching windows creating an arc shape. Most people use casement windows in the bow window set up. Bow windows offer the benefits of letting in more light and adding value to your home. However, bow windows are expensive to install and framing them can be tricky. A bow window can cost between $1,400 and $3,800.

Arched windows are windows that are rounded on the top. Arched windows make a great architectural addition to your home. However, most arched windows don’t open, so they won’t add any ventilation. It also makes it impossible to clean them from the inside. Arched windows typically cost between $325 and $500 per window.

Awning windows are great for rainy areas because they create a water-resistant awning when they are opened. The whole window can open or may be placed above a fixed picture window. Awning windows are great for ventilation and letting in light. However, they are often opened by a crank which will break over time, and awning windows can break off in a high wind. On average, you can expect to pay between $420 and $760 for an awning window.

An egress window is the window inside a window well. Egress windows are often found below ground level in basements and cellars. The main purpose of an egress window is to provide an emergency escape route since they don’t let in much light. Some cities require egress windows by law. An individual egress window can cost between $1,000 and $5,000 for installation.

Casement windows are windows that open out on hinges instead of sliding up or pivoting. These windows are usually operated by a crank. Casement windows offer great views since there are no rails in the middle, and they are often better at blocking drafts and noise. However, casement cranks can wear out over time and if the casements are open during a windy day, they can break off. Casement windows can cost between $450 and $750.

Storm windows can go over most types of windows and offer an additional layer of insulation and protection against the weather. They sit in the same frame as the existing window. They range in cost between $200 and $460.